Improvised Handheld Fireworks: How to Make Homemade Sparklers

Jun 30, 2013 04:41 PM
Jul 4, 2017 12:25 AM

The big fireworks day is almost here, but most of you are limited in what you can do when it comes to celebrating the Fourth of July with a bang. Unless you live in a dry area prone to wildfires, one type of fireworks you can probably still legally buy are sparklers.

But why buy boxes of sparklers for Independence Day when you can improvise and make your own handheld sparklers?

Warning

There is a very real risk to health and safety. This project should not be attempted without adult supervision and adequate training. Pyrotechnics are not toys and should be handled with extreme caution and respect.

High temperatures on the stove or oven may cause auto-ignition of the pyrotechnic composition which may lead to serious injury, death, and/or permanent damage to equipment and property.

Ignition of an incendiary or explosive material may not be legal in your area, and resulting damage may not be covered by your insurance. Check city laws and ordinances before attempting. Use of this video content is at your own risk.

Making Homemade Sparklers

These sparklers are nearly identical to the slow burning fuses made in a previous project, which I used for my smoke flares. The only difference is, this time I tried adding food coloring for effect, and a clothespin as a holder to help prevent burns to fingers.

635081885692636633.jpg
635081885889820979.jpg
635081885692636633.jpg
635081885889820979.jpg

This sparkler, or sparkle stick, works best at night, or in low-light conditions. During the day, you see more smoke than you do sparks, but both effects are pretty fun.

The Recipe for These "Sparkle Sticks"

  • 60 mL Water (Heated on medium heat)
  • 36 grams KNO3 (potassium nitrate) which I obtained in the form of stump remover
  • 24 grams white sugar
  • 1–20 drops of food coloring (color to suit your preference)
635081886325373744.jpg

Note: White/gray smoke is the only color emitted, even if you use different colored dyes. Colored smoke cannot be made with KNO3.

Step 1: Make the Mixture

Shake the sugar and KNO3 together to get an intimate mixture, then pour into the water and stir until dissolved.

635082746469544508.jpg

Step 2: Soak Yarn in the Mixture

Soak about 12 feet of 100% cotton yarn in the solution, then space evenly on a cookie tray.

635081886818646611.jpg
635081887021914968.jpg
635082746859545193.jpg
635081886818646611.jpg
635081887021914968.jpg
635082746859545193.jpg

Step 3: Bake at 300ºF

Bake in an oven at 150ºC (300ºF) for about 20 minutes, making sure to lift the yarn at 10 minutes to make sure it doesn't stick to the pan.

635081887501303810.jpg
635081887727036206.jpg
635081887501303810.jpg
635081887727036206.jpg

Let cool for 5-10 minutes.

Step 4: Cut to Desired Length

When your sparkle cords are cooled down, you can easily cut them to any desired size with a pair of scissors, and place in clothespin.

635081888051048775.jpg
635081888256345136.jpg
635081888462109497.jpg
635081888652897832.jpg
635081888051048775.jpg
635081888256345136.jpg
635081888462109497.jpg
635081888652897832.jpg

I made a couple of different batches, in different colors, for the holiday.

635081891682411152.jpg

Step 5: Enjoy!

Now you can put on gloves and safety glasses, light your sparkler, and enjoy! The sparks are much more noticeable at night when there is very little light. During the day, the smoke is more visible. Personally, I think both effects are awesome.

635081889091570603.jpg
635081889278302931.jpg
635081889091570603.jpg
635081889278302931.jpg

Gloves are recommended as bits of burning fuel will occasionally fly off, and can burn the skin.

635081891103026134.jpg

If the sparkler burns too fast, wait a few hours, or days to try again. The composition is hygroscopic and will absorb moisture from the air, reducing the rate of burn, until eventually, it won't light at all.

If you want to revive an old batch that has absorbed too much moisture, re-bake in the oven for 20 minutes at 150ºC (300ºF).

635081889528059369.jpg
635081892258832164.jpg
635081889528059369.jpg
635081892258832164.jpg

These types of devices may not be legal to make or use in your area, so check local laws before attempting to duplicate this project, and as always, be safe and aware of your environment before igniting anything flammable!

The best part is, you can make hundreds of these sparklers for only a few dollars, and the clippings can be burned together for a more dramatic display!

635081892100959887.jpg
635081892427780461.jpg
635081892532144644.jpg
635081892100959887.jpg
635081892427780461.jpg
635081892532144644.jpg

Well, now you know how to make some improvised handheld fireworks to celebrate July 4th or another special occasion. If you haven't seen the video yet, you can still see it here. And if interested, check out how to make fuse cord and smoke flares, too.

If you like this project, perhaps you'll like some of my others. Check them out here on WonderHowTo or at thekingofrandom.com.

Comments

No Comments Exist

Be the first, drop a comment!