Here's how to make a simple form of a slow burning fuse from materials around the house.
WARNING: Ignition of an incendiary or explosive material may not be legal in your area, so check local laws before attempting. Use of this video content is at your own risk.
I made these fuses out of 100% cotton yarn, soaked in a solution of KNO3 (potassium nitrate) and white table sugar.
Mix together a composition of 36 grams KNO3, and 24 grams of white table sugar and shake them together to make sure they are well mixed.
Next, boil 1/3 cup of water and stir in the composition until it's completely dissolved.
Measure out about 12 feet of 100% cotton yarn, and soak it in the solution, and at any point now the yarn can be removed and strung out on a cookie sheet in a zigzag pattern.
Preheat your oven to 300ºF and bake for 20 minutes.
Then let cool for 5-10 minutes.
At this point, the yarn should be very stiff and can be cut down into different lengths for different projects.
I used these fuses in a batch of smoke flares seen in a different project. You can see that project video here.
Testing the fuses, I was happy to see they had a steady burn rate of about 3 seconds per inch. Every batch is a little different, so it's a good idea to test a piece to get a feel for how it burns, before actually using it for a specific purpose.
I've found a fun use for these fuse cords is in making a cheap batch of make-shift sparklers for me and my kids.
Hundreds can be made for just a couple of dollars, and they burn and sparkle brilliantly at night.
If you liked this project, perhaps you'll like some of my others. Check them out at thekingofrandom.com.
Comments
No Comments Exist
Be the first, drop a comment!